Equipment Rental

Pressure Tech, Inc. is an industry leader in the quality production and rental of both trailer and stand mounted filter press units. We give the attention and personal service required for each unique dewatering project.

Pressure Tech, Inc. has grown into the standard setting leader it is today by offering top of the line filter presses, tanker trailers, shakers, mix tanks and fast fill pumps, at some of the most competitive prices in the industry.

JWI Filter Press

Our 90-100 cu/ft JWI trailer mounted filter press has leveling stands, a rigid, weather resistant rooftop. Adequate ceiling mounted lighting provides a highly visible work area for around the clock application. The belt conveyor is capable of handling any load the press can drop per cycle and has been a customer favorite since being added to our fleet two years ago.

Press Specs

90-100 cu/ft filter press
3.7 yards per drop
Belt Conveyor
Air – Min. 185CFM on ¾” line
Electric – 480 Volt / 3 Phase / 30 AMP
4” Feed & Return Lines
Maximum feed 225 psi
1200 mm plates

Trailer specs

  • Length (48’)
  • Width (102”)
  • Height (13’)
  • Weight 64,060 lbs
  • Hitch to First Axle (32’6”)
  • 1st to 2nd Axle (49”)
  • 2nd to 3rd Axle (49”)
  • Plate # (557196KY)
  • Tire Size (11R 24 / 15)
  • Tires per Axle (4)
  • Conveyor Height from Ground (54”)
  • Weight at Trailer Axles 42,880

Durco Filter Press

Our 90-100 cu/ft Durco trailer mounted filter press has leveling stands with adequate ceiling mounted lighting, providing a highly visible work area for a 24/7 worksite. The belt conveyor is capable of handling any load the press can drop per cycle and has spent the majority of its life dewatering drilling fluids in the mountains of Appalachia.

Press Specs:

  • 90-100 cu/ft filter press
  • 3.7 yards per drop
  • Belt Conveyor
  • Air – Min. 185CFM on ¾” line
  • Electric – 480 Volt / 3 Phase / 30 AMP
  • 4” Feed & Return Lines
  • Maximum feed 225 psi
  • 1200 mm plates

Trailer Specs:

Contact Tim Stapleton at 606-465-7955 or by email at: tstapleton@pressuretechinc.com

Fast Fill Pumps

Our pumps are automatic, self priming centrifugal pumps best suited for pumping under discharge pressure conditions or high discharge lifts. These are excellent for dewatering and as a temporary replacement or supplement for transfer pumps.

                                                                      Pump Specs:

  • Maximum Operating Speed:
    2400 rpm
  • Maximum Operating Temperature:
    +212°F (100°C)
  • Maximum Working Pressure:
    197 psi (13.6 BAR)
  • Maximum Suction Pressure:
    100 psi (6.9 BAR)
  • Maximum Casing Pressure:
    296 psi (20.4 BAR)
  • Fuel Tank Capacity:
    100 gallons (378.5 liters)
  • Fuel Consumption:
    5.2 gph (19.7 lph)
  • Pipe Connections:
    4" (100mm) ASA 150#
  • Solids Handling:
    1-3/8" (35mm) diameter

Dredges

Specs

  • Engine:
    Detroit 453, 160 HP at 2100 RPM
  • Pump:
    8”x 8”x 12” (200mm x 200mm x 300mm)
  • Max Flow:
    2100 gpm (132.5 L/s)
  • Max TDH:
    115’ (35m)
  • Max. Sphere Passage:
    3” (76mm)
  • Length:
    39’6” (12m)
  • Width:
    7’9” (2.36m)
  • Height:
    8’1” (2.46m)
  • Weight:
    21,000 lbs (9,525 kg)
  • Fuel Capacity:
    360 gal diesel (1363 L)
  • Dredging Depth:
    15’ (4.57m)
  • Width of Cut:
    8’ (2.44m)
  • Production:
    70-90 yds/hr (53.5-68.8 cu. m/hr)

Vacuum Tankers

We have 6,000 gallon, stainless steel vacuum tankers available for rent. All of the trailers have a new primary and secondary. Delivery options are available. Please call 606-834-1545 for a free quote.

Other Equipment

Pressure Tech, Inc. is capable of manufacturing tanks, custom building filter presses, as well as providing manpower for your dewatering project. If you cannot find what you need on this website, please contact us via the contact page, call us directly at 606-834-1545 or email us at
pressure@pressuretechinc.com.

Shaker Screens

Utilizing a shaker during the course of a dewatering project is often necessary. Eliminating larger sediment prior to filtration maximizes the use of the press as a dewatering mechanism, prevents larger sediments from causing any disturbances during the process and saves the user both time and money. If you have questions as to whether our shakers are applicable for your project, please call 606-834-1545.

 
 

 

© Copyright Pressure Tech